Old Water System

Our client had been renting a softener and an iron filter from another company for over 10 years before we met them. Both systems were undersized and required constant service as they were not capable of handling the iron level in the water.

In late 2009, the homeowners heard rumors about high Arsenic in the Shorewood, MN area. After talking to local residents, they contacted
Premier Water to see what could be done.

We collected a water sample and had the water tested at a state certified lab. The results came back with 34.1ppb – 3.4x the legal limit for Arsenic.

“For 10 years, we had been buying organic food, and cooking it in water full of Arsenic. We couldn’t believe it. We wanted to make sure our kids could have a safe drink of water anywhere in the home.”

Why the Previous Water System Failed:

1. Iron Filter was too small and could not support the water flow rates this family required

1. Softener frequently ran out of salt

1. It had ZERO EFFECT on the Arsenic Levels!

New Water Treatment System

Our client wanted to start from scratch and take advantage of the new technology we had to offer. We designed a system with guaranteed iron and arsenic removal, plus salt-free softening.

The system we designed uses a 13”x54” Iron Filter that processes water roughly 7x slower than their previous system. This results in superior iron removal and initial arsenic precipitation and reduction.

We followed the iron filter with a Pureoflow Whole-House System that uses a proprietary membrane designed by GE Water & Process Technology. This membrane is actually designed to soften hard water – something that would destroy a normal membrane. The Pureoflow was successful at softening the water, reducing the TDS level, and the Arsenic levels were reduced well below the EPA limit!

“Our old rental equipment required constant service and used so much salt. We had ongoing problems with iron stains and were not confident the other company could handle Arsenic.

We love our new system – no rust, no salt, and NO ARSENIC!”

System Performance BEFORE:
Hardness: 21gpg
Total Iron: 4ppm
TDS: 261ppm
Arsenic: 34.1ppb
System Flow Rate: 5gpm

System Performance AFTER:
Hardness: 0gpg
Total Iron: 0ppm
TDS: 21ppm
Arsenic: 1.15ppb
System Flow Rate: 22gpm

5gpg is the average national hardness
0.3ppm iron is the limit before staining begins
10ppb is the legal limit for Arsenic

Click here to download this case study